AuroraBoot

Automatically provision machines with Kairos and AuroraBoot.

AuroraBoot is a tool designed to make the process of bootstrapping Kairos machines quick, simple and efficient. It is specifically designed for the Kairos operating system and provides a comprehensive solution for downloading required artifacts and provisioning a machine, both from network or manually via flashing to USB stick.

With AuroraBoot, you can prepare the environment for network-based bootstrapping, download the necessary release assets, and also customize the installation media for USB-based mass-installations. Whether you’re looking to install Kairos on a single machine or multiple machines, AuroraBoot makes it easy and efficient.

AuroraBoot can be useful to:

  • prepare multiple-nodes in a lab before shipment
  • offer a simple, intuitive and streamlined way to deploy Kairos automatically and manually
  • deploy Kairos nodes in a network segment where we can already send workload to (running AuroraBoot in an already-existing downstream cluster)

AuroraBoot

Scope

AuroraBoot has the following scope:

  • Download release assets in order to provision one or more machines
  • Prepare automatically the environment to boot from network
  • Provision machines from network with a version of Kairos and cloud config
  • Customize The installation media for installations from USB

Prerequisites

  • docker or a container engine of your choice
  • Port 8090, 8080 and 67 free on the host running AuroraBoot
  • The machine running AuroraBoot have to be on the same network segment of the nodes to be bootstrapped
  • The nodes need to be configured to boot over network, or be capable of booting via USB for offline mode
  • ProxyDHCP supported by the DHCP network attempting to netboot (see also pixiecore architecture). There should be an already running DHCP server on your network. AuroraBoot doesn’t take over the DHCP server, neither require you to do any specific configuration, however a DHCP server which is compliant to ProxyDHCP requests should be present in the same network running AuroraBoot and the machines to boot.

MacOS

Unfortunately for macOS systems we cannot run the netboot through docker as it’s run inside a VM, as it can’t see the host network. Building ISOs still works as long as you mount the container /tmp disk to a local dir so its exported there like so:

docker run --rm -ti -v "$PWD"/config.yaml:/config.yaml -v ${PWD}:/tmp quay.io/kairos/auroraboot \ 
                    --set "artifact_version=v3.2.3" \
                    --set "release_version=v3.2.3" \
                    --set "flavor=@flavor" \
                    --set "flavor_release=@flavorRelease" \
                    --set "repository=kairos-io/kairos" \
                    --set "disable_http_server=true" \
                    --set "disable_netboot=true" \
                    --cloud-config /config.yaml

This will build the ISO and put the generated artifacts in the current dir under the ${PWD}/iso dir.

For netboot, we recommend that you run the AuroraBoot binary directly by grabbing it from the releases page. This requires just one dependency that you can install via brew with brew install xorriso

Windows

Netboot in windows is not supported, only iso creation via the docker image.

Overview

To run AuroraBoot, simply use docker or the container engine of your choice (such as podman, …). AuroraBoot images are published in quay and the source code is available in GitHub.

The basic usage of AuroraBoot involves passing it several parameters that define the installation environment, such as the version of Kairos you want to install, the cloud config you want to use, and other customizations you may need. You can pass these parameters either as command-line arguments, or as a full YAML configuration file.

AuroraBoot will download the artifacts required for bootstrapping the nodes, and prepare the environment required for a zero-touch deployment.

For example, to netboot a machine with the latest version of Kairos and @flavor using a cloud config, you would run the following command:

docker run --rm -ti --net host quay.io/kairos/auroraboot \
                    --set "artifact_version=v3.2.3" \
                    --set "release_version=v3.2.3" \
                    --set "flavor=@flavor" \
                    --set repository="kairos-io/kairos" \
                    --cloud-config https://...

This command will download the necessary artifacts and start the provisioning process. The machine will attempt to boot from network, and will be configured with the specified version of Kairos.

Network-based bootstrapping

By default AuroraBoot will automatically attempt to bootstrap other machines, which are configured to boot from network, within the same network. No further configuration or settings necessary.

There are only 3 steps involved in the process:

  1. Select the release of Kairos that you want to deploy and optionally a cloud config (see also our examples)
  2. Run AuroraBoot in your workstation with the appropriate CLI args
  3. Boot up other nodes, already configured to boot from network

1. Selecting a release

AuroraBoot can bootstrap container images or released assets from our GitHub release process.

To use GitHub releases set a release version with --set release_version (the GitHub release), an artifact version with --set artifact_version (the artifact version) a flavor with --set flavor and a repository with --set repository. Kairos has releases with (standard) and without (core) k3s both can be downloaded in the release page at kairos.

To use a container image, you can use the Kairos released images or customized by specifying --set container_image instead with the container image of choice.

2. Run AuroraBoot

Now we can run AuroraBoot with the version we selected, either from GitHub releases or directly from a container image.

In the example below we selected v3.2.3-k3sv1.31.2+k3s1, @flavor flavor, so we would run either one of the following:

By indicating a container_image, AuroraBoot will pull the image locally and start to serve it for network booting.

You can use the Kairos released images or your own.

docker run --rm -ti --net host quay.io/kairos/auroraboot \
                    --set "container_image=quay.io/kairos/@flavor:@flavorRelease-standard-amd64-generic-v3.2.3-k3sv1.31.2-k3s1"

By indicating a container_image prefixed with docker://, AuroraBoot will pull the image from the local daemon and start to serve it for network booting.

This implies that the host has a docker daemon, and we have to give access to its socket with -v /var/run/docker.sock:/var/run/docker.sock.

docker pull quay.io/kairos/@flavor:@flavorRelease-standard-amd64-generic-v3.2.3-k3sv1.31.2-k3s1
# This will use the container image from the host's docker daemon
docker run --rm -ti -v /var/run/docker.sock:/var/run/docker.sock --net host quay.io/kairos/auroraboot \
                    --set "container_image=docker://quay.io/kairos/@flavor:@flavorRelease-standard-amd64-generic-v3.2.3-k3sv1.31.2-k3s1"

By indicating a artifact_version, a release_version, a flavor and a repository, AuroraBoot will use GitHub released assets.

docker run --rm -ti --net host quay.io/kairos/auroraboot \
                    --set "artifact_version=v3.2.3-k3sv1.31.2-k3s1" \
                    --set "release_version=v3.2.3" \
                    --set "flavor=@flavor" \
                    --set "flavor_release=@flavorRelease" \
                    --set "repository=kairos-io/provider-kairos"

To specify a cloud config, you can set it with --cloud-config. See the sections below for further examples.

3. Start nodes

Generic hardware based netbooting is out of scope for this document.

Nodes need to be configured to boot over network, and after AuroraBoot is started should be ready to accept a connection, a typical output of a successfull run is:

2023/02/08 14:27:30 DHCP: Offering to boot 08:00:27:54:1a:d1
2023/02/08 14:27:30 TFTP: Sent "08:00:27:54:1a:d1/4" to 192.168.68.113:6489
2023/02/08 14:27:36 DHCP: Offering to boot 08:00:27:54:1a:d1
2023/02/08 14:27:36 HTTP: Sending ipxe boot script to 192.168.68.113:45435                               
2023/02/08 14:27:36 HTTP: Sent file "kernel" to 192.168.68.113:45435                                     
2023/02/08 14:27:36 HTTP: Sent file "initrd-0" to 192.168.68.113:45435
2023/02/08 14:27:49 HTTP: Sent file "other-0" to 192.168.68.113:43044 

If trying on a VM, for instance on VirtualBox or QEMU, a typical setup might be:

  • Set Netboot as first boot in the boot process order

Screenshot from 2023-02-08 10-37-59

  • Use bridge networking with the host (if running AuroraBoot and the VM in the same host)

Screenshot from 2023-02-08 10-38-05

USB-based bootstrapping

AuroraBoot by default prepares an ISO with the custom cloud init prepared for being flashed to an USB stick either with dd or with BalenaEtcher.

To disable netboot and provide only offline artifacts, run auroraboot with --set disable_netboot=true.

1. Node configuration

Create a cloud config file, see our documentation for ready-to use examples, but a minimal configuration that automatically installs, and allows us to login afterward can be the following:

#cloud-config

install:
  auto: true
  device: "auto"
  reboot: true

# Define the user accounts on the node.
users:
- name: "kairos"                       # The username for the user.
  passwd: "kairos"                      # The password for the user.
  ssh_authorized_keys:                  # A list of SSH keys to add to the user's authorized keys.
  # - github:mudler                       # A key from the user's GitHub account.
  # - "ssh-rsa AAA..."                    # A raw SSH key.

Save the file locally or remotely, you can pass it by in the arguments with --cloud-config to AuroraBoot. Note that can also be a remote http(s) path.

2. Create an offline ISO

Run AuroraBoot with a cloud-config to create an ISO with the embedded configuration:

Check we have the cloud config file:

ls 
# config.yaml

Build the ISO:

docker run -v "$PWD"/config.yaml:/config.yaml \
                    -v "$PWD"/build:/tmp/auroraboot \
                    --rm -ti quay.io/kairos/auroraboot \
                    --set container_image=quay.io/kairos/@flavor:@flavorRelease-core-amd64-generic-v3.2.3 \
                    --set "disable_http_server=true" \
                    --set "disable_netboot=true" \
                    --cloud-config /config.yaml \
                    --set "state_dir=/tmp/auroraboot"

Results should be available under build/ in the current directory:

sudo ls -liah build/iso
#
# total 778M
# 34648528 drwx------ 2 root root 4.0K Feb  8 16:39 .
# 34648526 drwxr-xr-x 5 root root 4.0K Feb  8 16:38 ..
# 34648529 -rw-r--r-- 1 root root  253 Feb  8 16:38 config.yaml
# 34649370 -rw-r--r-- 1 root root 389M Feb  8 16:38 kairos.iso
# 34649372 -rw-r--r-- 1 root root 389M Feb  8 16:39 kairos.iso.custom.iso
# 34649371 -rw-r--r-- 1 root root   76 Feb  8 16:39 kairos.iso.sha256

Check we have the cloud config file:

ls 
# config.yaml

Build the ISO:

docker run -v "$PWD"/build:/tmp/auroraboot -v /var/run/docker.sock:/var/run/docker.sock --rm -ti quay.io/kairos/auroraboot \
                    --set "artifact_version=v3.2.3-k3sv1.31.2-k3s1" \
                    --set "release_version=v3.2.3" \
                    --set "flavor=@flavor" \
                    --set "flavor_release=@flavorRelease" \
                    --set "repository=kairos-io/provider-kairos" \
                    --set "disable_http_server=true" \
                    --set "disable_netboot=true" \
                    --cloud-config /config.yaml \
                    --set "state_dir=/tmp/auroraboot"

Results should be available under build/ in the current directory:

sudo ls -liah build/iso
#
# total 778M
# 34648528 drwx------ 2 root root 4.0K Feb  8 16:39 .
# 34648526 drwxr-xr-x 5 root root 4.0K Feb  8 16:38 ..
# 34648529 -rw-r--r-- 1 root root  253 Feb  8 16:38 config.yaml
# 34649370 -rw-r--r-- 1 root root 389M Feb  8 16:38 kairos.iso
# 34649372 -rw-r--r-- 1 root root 389M Feb  8 16:39 kairos.iso.custom.iso
# 34649371 -rw-r--r-- 1 root root   76 Feb  8 16:39 kairos.iso.sha256

The result process will write an iso kairos.iso.custom.iso under build/iso. That is the iso with our embedded cloud-config.

2. Run the image

The iso now is ready to be written to USB stick with either dd or with BalenaEtcher, or attached to a VM.

When deploying on a bare metal server, directly flash the image into a USB stick. There are multiple ways to do this:

From the command line using the dd command

dd if=build/kairos.iso.custom.iso of=/path/to/dev bs=4MB

or with BalenaEtcher.

This would be the way to start it via the command line, but you can also use the GUI
  virt-install --name my-first-kairos-vm \
              --vcpus 1 \
              --memory 1024 \
              --cdrom build/kairos.iso.custom.iso \
              --disk size=30 \
              --os-variant opensuse-factory \
              --virt-type kvm
Immediately after open a viewer so you can interact with the boot menu:
virt-viewer my-first-kairos-vm

Configuration

The AuroraBoot configuration file reference is the following:

# Corresponding artifact versions from the kairos release page (e.g. kubernetes version included)
artifact_version: "v..."
# Version of the release in github
release_version: "v3.2.3"

# Flavor
flavor: "@flavor"

# Github repository
repository: "kairos-io/kairos"

# Container image (takes over)
container_image: "..."

# Disable netboot
disable_netboot: true

# Disable http server for serving offline generated ISOs
disable_http_server: true

# Specify a directory that will be used by auroraboot to download artifacts
# Reuse the same to cache artifacts.
state_dir: "/tmp/auroraboot"

# Default http binding port for offline ISO generation
listen_addr: ":8080"

# Cloud config to use when booting the machine.
cloud_config: |
OptionDescription
artifact_versionCorresponding artifact versions from the Kairos release page (e.g. Kubernetes version included).
release_versionVersion of the release in GitHub.
flavorThe Kairos flavor to use. See the Kairos support matrix for a list.
repositoryGithub repository to use. This can either be kairos-io/kairos or kairos-io/provider-kairos for images with k3s prior to v2.4.0.
container_imageContainer image. If prefixed with docker:// it will try to pull from the local docker daemon. If a container_image is specified, artifact_version, flavor and release_version are ignored.
disable_netbootDisable netboot.
disable_http_serverDisable http server for serving offline generated ISOs.
netboot_http_portSpecify a netboot HTTP port (defaults to 8090).
state_dirSpecify a directory that will be used by auroraboot to download artifacts and reuse the same to cache artifacts.
listen_addrDefault http binding port for offline ISO generation.
cloud_configCloud config path to use for the machines. A URL can be specified, use - to pass-by the cloud-config from STDIN
iso.dataDefines a path to be embedded into the resulting iso. When booting, the files will be accessible at /run/initramfs/live
netboot.cmdlineOverride the automatically generated cmdline with a custom one to use during netboot. config_url and rootfs are automatically constructed. A reasonable value can be netboot.cmdline=rd.neednet=1 ip=dhcp rd.cos.disable netboot install-mode console=tty0

To use the configuration file with AuroraBoot, run AuroraBoot specifying the file or URL of the config as first argument:

docker run --rm -ti -v "$PWD"/config.yaml:/config.yaml --net host quay.io/kairos/auroraboot /config.yaml

The CLI options can be used in place of specifying a file, and to set fields of it. Any field of the YAML file, excluding cloud_config can be configured with the --set for instance, to disable netboot we can run AuroraBoot with:

docker run --rm -ti --net host quay.io/kairos/auroraboot ....  --set "disable_netboot=true"

To specify a cloud config file instead, use --cloud-config (can be also url):

docker run --rm -ti -v "$PWD"/config.yaml:/config.yaml --net host quay.io/kairos/auroraboot .... --cloud-config /config.yaml

Both the config file and the cloud-config file can be a URL.

Cloud config

A custom cloud configuration file can be passed either with the --cloud-config flag, or in the AuroraBoot configuration file under the cloud_config key.

It is possible to apply templating to a cloud config. Indeed any value passed to --set is accessible as a template in the cloud config file with the [[ and ]] delimiter, for instance consider the following cloud config file, which allows to set a password for the kairos user and a GitHub handle allowed to login to the machine:

#cloud-config

install:
  auto: true
  device: "auto"
  reboot: true

# Define the user accounts on the node.
users:
- name: "kairos"                       # The username for the user.
  passwd: "[[.kairos.password]]"                      # The password for the user.
  ssh_authorized_keys:                  # A list of SSH keys to add to the user's authorized keys.
  - github:[[.github.user]]

We would then set the user to mudler and the password to foobar when running AuroraBoot like the following:

docker run --rm -ti -v "$PWD"/config.yaml:/config.yaml --net host \
                                quay.io/kairos/auroraboot \
                                --cloud-config /config.yaml \
                                --set "github.user=mudler" \
                                --set "kairos.password=foobar"

Config files can be also hosted remotely, and given as URLs to AuroraBoot.

We can indeed use the template in the example folder with the command above:

docker run --rm -ti --net host \
                        quay.io/kairos/auroraboot \
                        --cloud-config https://raw.githubusercontent.com/kairos-io/kairos/master/examples/auroraboot/master-template.yaml \
                        --set "github.user=mudler" \
                        --set "kairos.password=foobar"

To pass-by a cloud-config via pipes, set --cloud-config -, for example:

cat <<EOF | docker run --rm -i --net host quay.io/kairos/auroraboot \
                    --cloud-config - \
                    --set "container_image=quay.io/kairos/@flavor:@flavorRelease-standard-amd64-generic-v3.2.3-k3sv1.31.2-k3s1"
#cloud-config

install:
 device: "auto"
 auto: true
 reboot: true

hostname: metal-bundle-test-{{ trunc 4 .MachineID }}

users:
- name: kairos
  # Change to your pass here
  passwd: kairos
  ssh_authorized_keys:
  # Replace with your github user and un-comment the line below:
  - github:mudler

k3s:
  enabled: true

# Specify the bundle to use
bundles:
- targets:
  - run://quay.io/kairos/community-bundles:system-upgrade-controller_latest
  - run://quay.io/kairos/community-bundles:cert-manager_latest
  - run://quay.io/kairos/community-bundles:kairos_latest

kairos:
  entangle:
    enable: true
EOF

Examples

Offline ISO build from local container image

First make sure we have the image locally with:

docker pull <IMAGE>

Build the custom ISO with the cloud config:

docker run -v "$PWD"/config.yaml:/config.yaml \
             -v "$PWD"/build:/tmp/auroraboot \
             -v /var/run/docker.sock:/var/run/docker.sock \
             --rm -ti quay.io/kairos/auroraboot \
             --set container_image=docker://<IMAGE> \
             --set "disable_http_server=true" \
             --set "disable_netboot=true" \
             --cloud-config /config.yaml \
             --set "state_dir=/tmp/auroraboot"

Offline ISO build from container images

Build the custom ISO with the cloud config:

docker run -v "$PWD"/config.yaml:/config.yaml \
             -v "$PWD"/build:/tmp/auroraboot \
             --rm -ti quay.io/kairos/auroraboot \
             --set container_image=quay.io/kairos/@flavor:@flavorRelease-core-amd64-generic-v3.2.3 \
             --set "disable_http_server=true" \
             --set "disable_netboot=true" \
             --cloud-config /config.yaml \
             --set "state_dir=/tmp/auroraboot"

Override GRUB config file

It is possible to override the default GRUB config file of the ISO by creating a directory that contains the files that we want to add or replace in it.

For example, to override the GRUB config file:

mkdir -p data/boot/grub2
# You can replace this step with your own grub config. This GRUB configuration is the boot menu of the ISO
wget https://raw.githubusercontent.com/kairos-io/packages/main/packages/livecd/grub2/config/grub_live_bios.cfg -O data/boot/grub2/grub.cfg

docker run -v "$PWD"/config.yaml:/config.yaml \
             -v "$PWD"/data:/tmp/data \
             -v "$PWD"/build:/tmp/auroraboot \
             --rm -ti quay.io/kairos/auroraboot \
             --set container_image=quay.io/kairos/@flavor:@flavorRelease-core-amd64-generic-v3.2.3 \
             --set "disable_http_server=true" \
             --set "disable_netboot=true" \
             --cloud-config /config.yaml \
             --set "state_dir=/tmp/auroraboot" \
             --set "iso.data=/tmp/data"

Prepare ISO for Airgap installations

See the Airgap example in the examples section.

Netboot with core images from Github releases

docker run -v "$PWD"/config.yaml:/config.yaml --rm -ti --net host quay.io/kairos/auroraboot \
        --set "artifact_version=v3.2.3" \
        --set "release_version=v3.2.3" \
        --set "flavor=@flavor" \
        --set repository="kairos-io/kairos" \
        --cloud-config /config.yaml

Netboot with k3s images from Github releases

docker run -v "$PWD"/config.yaml:/config.yaml --rm -ti --net host quay.io/kairos/auroraboot \
        --set "artifact_version=v3.2.3-k3sv1.31.2-k3s1" \
        --set "release_version=v3.2.3" \
        --set "flavor=@flavor" \
        --set "flavor_release=@flavorRelease" \
        --set "repository=kairos-io/provider-kairos" \
        --cloud-config /config.yaml

Netboot from container images

docker run -v "$PWD"/config.yaml:/config.yaml --rm -ti --net host quay.io/kairos/auroraboot \
        --set container_image=quay.io/kairos/@flavor:@flavorRelease-core-amd64-generic-v3.2.3
        --cloud-config /config.yaml

Generate RAW disk image (EFI)

AuroraBoot can generate raw disk images (EFI) that can be used as cloud images (for example as AWS AMI images) or QEMU.

Consider the following example:

docker run -v /var/run/docker.sock:/var/run/docker.sock --net host \
  -v $PWD:/aurora --rm -ti quay.io/kairos/auroraboot \
  --debug \
  --set "disable_http_server=true" \
  --set "container_image=quay.io/kairos/@flavor:@flavorRelease-standard-amd64-generic-v3.2.3-k3sv1.31.2-k3s1" \
  --set "disable_netboot=true" \
  --cloud-config /aurora/config.yaml \
  --set "disk.raw=true" \
  --set "state_dir=/aurora"

The raw disk image will be available in iso/disk.raw

The cloud config file (config.yaml) should look like the following:

#cloud-config

hostname: kairos

## Login
users:
- name: "kairos"
  lock_passwd: true
  ssh_authorized_keys:
  # here add github username or ssh keys
  # - github:mudler

## First Setup
## This block is needed as the image will boot to rescue mode and configure the drive of the
## VM.
name: "Default deployment"
stages:
  boot:
  - name: "Repart image"
    layout:
      device:
        path: /dev/sdb
      add_partitions:
        - fsLabel: COS_STATE
          size: 150240
          pLabel: state
  - name: "Repart image"
    layout:
      device:
        path: /dev/sda
      add_partitions:
        - fsLabel: COS_PERSISTENT
          pLabel: persistent
          size: 0 # all space
  - if: '[ -f "/run/cos/recovery_mode" ] && [ ! -e /usr/local/.deployed ]'
    name: "Deploy kairos"
    commands:
      - kairos-agent --debug reset --unattended
      - touch /usr/local/.deployed
      - reboot

Use the config file

Write down an aurora config file as aurora.yaml:

container_image: "quay.io/kairos/@flavor:@flavorRelease-core-amd64-generic-v3.2.3"

cloud_config: |
    #cloud-config

    install:
    auto: true
    device: "auto"
    reboot: true

    # Define the user accounts on the node.
    users:
    - name: "kairos"                       # The username for the user.
    passwd: "kairos"                      # The password for the user.
    ssh_authorized_keys:                  # A list of SSH keys to add to the user's authorized keys.
    # - github:mudler                       # A key from the user's GitHub account.
    # - "ssh-rsa AAA..."                    # A raw SSH key.    

And then run:

docker run -v "$PWD"/aurora.yaml:/aurora.yaml --rm -ti --net host quay.io/kairos/auroraboot /aurora.yaml